How to install peel and stick wallpaper
Recommended Tools
- √Plastic smoother tool
- √Pencil
- √Craft knife


Step 1: Lay Out Your Wallpaper Mural
Unroll the wallpaper and separate the panels by cutting between the dotted lines, noting that the other panels on the roll will be upside down. Identify each panel and arrange them on the floor in installing order, starting with panel 1. Make sure that the entire wallpaper mural is oriented correctly by aligning the panel number with the top left corner of each one. Each panel is numbered in installing order from left to right.

Step 2: Hang The First Panel
Peel off the back paper of the first panel. Align the first panel with the pencil line and start hanging from the top and working down. Usea plastic smoothing tool or soft sponge to carefully blot out any air bubbles or ripples. Work from the top, and allow the wallpaper to fall naturally, be careful to avoid scratching or scuffing the printed surface.

Step 3: Butt up The Second Panel
Align the first panel with the pencil line and start hanging from the top and working down. Use a plastic smoothing tool or soft sponge to carefully blot out any air bubbles or ripples. Work from the top, and allow the wallpaper to fall naturally, be careful to avoid scratching or scuffing the printed surface.

Step 4: Repeat Until Finish
Repeat Step 2 and 3 until you finish hanging all the panels.